This New Prop Drive Flange sets the timing in accordance with the CDI (30BTDC) and corrects the timing between cylinders #2 &3.
You can replace the prop drive and the engine will be running like a Swiss clock.
We designed this in such a manner to minimize the set of skills necessary, no timing tools and other expenses involved. It is an easy DIY.
All you have to do is to replace yours is to follow the steps below.
- Take the set screw out ,
- Use a gear puller,
- Keep original cone,
- Put the CH Prop Drive Flange ON.
- Align and make sure the set screw is matching the slot on the crankshaft, Do not tight the set screw fully at this point.
- Tight the Prop Drive Flange by using a PLASTIC propeller,
- Tight the set screw
- DO NOT MOVE THE SENSOR from the factory, no timing tools are necessary.
Mitch (verified owner) –
Sure enough, my FG60 runs like a freaking watch with this drive installed.