Zenoah G45, G62, GT80 Conversion Kit, NO CDI Included.

$38.00

This kit is Flywheel and Sensor ONLY !!!,  you need to buy a CDi Separatly.
You can use the original Spark plug and buy a 3/4- 19 mm HEX CDi, change to CM-6  and buy a 14 to 10mm adapter & CM6 Plug or to 1/4-32 via 14mm to 1.4-32 adaptor & the plug.
This last 2 options will get you more clearence if you need.

Simple to install.

Take of the coil start from the back
Remove the 2 bolts on the propdrive
Remove the nut from flywheel
Remove flywheel- careful with the key!
Remove the magnito coil and retain the 2 bolts ( in some cases may need shorten)
Remove the old coil.

Install the the new flywheel
Tighten the center nut good
Install your propdrive and tighten the 2 bolts
Install the sensor where old magneto coil use to be above the old flywheel.

Have fun !!!!

 

 

 

 

5 in stock (can be backordered)

SKU: ZEN3015 Category:
  • Flywheel with magnet
  • Sensor holder WITH SENSOR

Install

This timing kit is to convert the old style MAGNETO to Electronic Ignition.

CDI is need it , you can use the original plug or change to CM-6 or 1/4-32  to get more clearence if you need.

Simple to install.

Take of the coil start from the back
Remove the 2 bolts on the propdrive
Remove the nut from flywheel
Remove flywheel- careful with the key!
Remove the magnito coil and retain the 2 bolts ( in some cases may need shorten)
Remove the old coil.

Install the the new flywheel
Tighten the center nut good
Install your propdrive and tighten the 2 bolts
Install the sensor where old magneto coil use to be above the old flywheel.

Have fun !!!!

 

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Zenoah G45, G62, GT80 Conversion Kit, NO CDI Included.”

Your email address will not be published.