CDI – 5 CYL for Saito 325, OS FR5-300 ,ASP FS400AR , MAGNUM XL400,

$300.00

-

NOTE:  At CHECK OUT add a message for what Spark Plug end you need.

5 Cylinder CH CDI Ignition For Radial Engines, Saito Engines 325, OS FR5-300 Sirius,  ASP FS400AR , MAGNUM XL400, Various Spark Plug Cap Options

  • 1/4-32 Straight, 1/4-32 90 degree , 1/4-32 120 degree  same thread as glow plugs.
  • CM-6 Straight, CM-6 90 degree, CM-6 120 degree     10 x 1 mm thread Spark Plug.
  • 5/8 ” / 16 mm Hex, 14 x 1.25 mm  thread Spark Plug.
  • 3/4″ / 19 mm Hex, 14 x 1.25 mm thread Spark Plug.

2 in stock

SKU: CHCDI-5CYL-1/4-120 Categories: ,

Overview

Hi Quality CDI ONLY, NO Other hardware included. Dual sensor and hardware need it.

Units offer the automatic advance formally known as “SYNCRO SPARK” feature to prevent “Kick Back”
Start Flip rate is around 400-600 range RPM, Flip MUST be firm grab of the prop.
A slower flip than 400 rate RPM will possible give the “Kick Back”, always use a GLOVE or stick.

Static Timing set  30 degrees BTDC WHEN MAGNET AND SENSOR FIRST COME IN CONTACT

We are flexible and we can manufacture them according to your needs.

Contact us by phone or email and let us know what you will need and will try to do our best to suit your needs.
– Wire length
– Voltage
– OEM Branding

THE CDI IGNITIONS  ARE NOT INTENDED FOR POWERING ANY MANNED MACHINERY OR MANNED MEANS OF TRANSPORT. THE COMPANY IS NOT RESPONSIBLE FOR ANY DAMAGE TO PERSONS OR PROPERTY IF ARE USED FOR THIS PURPOSE.

THE CDI IGNITIONS ARE FOR ENGINES INTENDED ONLY FOR POWERING RADIO CONTROLLED MODELS, MAINLY MODEL AIRCRAFT AND UNMANNED AERIAL VEHICLES IN WHICH NO PEOPLE ARE TRANSPORTED.

Specs

  • Operating Voltage:  6.0v to 8.4v
  • Static Timing 30 Degrees BTDC WHEN SENSOR/MAGNET FIRST “TOUCH” !!!
  • Red/Green LED Sensor activity indicator
  • Tachometer Output ( Brown/Red /Orange wires)
  • Operating RPM Range: 400 to 10000 RPM’s
  • Output Start Voltage:  25 KV  400-800 RPM’s
  • Output Voltage @ 10000 RPM’s: 12-15KV
  • Hi Voltage wire length: 16 inch  / 410 mm
  • Power and Sensor wire length minim: 7 inch / 180 mm
  • Dimensions Standard: L 3-15/16″  x  W 1-3/4″ x  H 1-1/4″
  • Dimensions Metric:      L 81 mm  x  W 45.5 mm  x  H 32 mm
  • Weight: 12 Oz  / 340 Gr
  • Ability to be repaired, electronics, coil, wire or cap.

 

The Very First 5 CYL prototype CDI Testing in MAY 2013

 

Specifications

 

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “CDI – 5 CYL for Saito 325, OS FR5-300 ,ASP FS400AR , MAGNUM XL400,”

Your email address will not be published. Required fields are marked *