CDI – 3 Cylinder Ignition For; Saito, Kolm, In-Line Engines Custom Cap, 5/8 or 3/4 HEX Plug

$155.00

-

Static Timing set  30 degrees BTDC WHEN MAGNET AND SENSOR FIRST COME IN CONTACT.
 FOR EASY START, ALL 3 SPARK PLUGS WILL FIRE UNDER 200 RPM’s, 
AFTER 200 RPM’s FIRE ORDER IS: 1-3-2 .

NOTE:  At CHECKOUT add a message for what Spark Plug end you need.

  • 1/4-32 Straight, 1/4-32 90 degree , 1/4-32 120 degree  same thread as glow plugs.
  • CM-6 Straight, CM-6 90 degree, CM-6 120 degree     10 x 1 mm thread Spark Plug.
  • 5/8 ” / 16 mm Hex, 14 x 1.25 mm  thread Spark Plug.
  • 3/4″ / 19 mm Hex, 14 x 1.25 mm thread Spark Plug.

3 Cylinder CDI for Radial Engines made by RCXEL – CHINA

1 in stock

SKU: CHCDI-3CYL-1/4-120 Categories: ,

3 Cylinder CDI for Radial Engines made by RCXEL – CHINA

Units offer the automatic advance formally known as “SYNCRO SPARK” feature to prevent “Kick Back”
Start Flip rate is around 400-600 range RPM, Flip MUST be firm grab of the prop.
A slower flip than 400 rate RPM will possible give the “Kick Back”, always use a GLOVE or stick.

Static Timing set  30 degrees BTDC WHEN MAGNET AND SENSOR FIRST COME IN CONTACT

 FOR EASY START, ALL 3 SPARK PLUGS WILL FIRE UNDER 200 RPM, ONCE ENGINE PASSES 
THAT RPM THEN FIRE ORDER STARTS: 1-3-2 .

Since we are manufacture them, we are flexible and we can manufacture them according to your needs.

Contact us by phone or email and let us know what you will need and will try to do our best to suit your needs.
– Wire length
– Voltage
– OEM Branding

THE CDI IGNITION, ARE NOT INTENDED FOR POWERING ANY MANNED MACHINERY OR MANNED MEANS OF TRANSPORT. THE COMPANY IS NOT RESPONSIBLE FOR ANY DAMAGE TO PERSONS OR PROPERTY IF ARE USED FOR THIS PURPOSE.

THE  CDI IGNITIONS ARE FOR ENGINES INTENDED ONLY FOR POWERING RADIO CONTROLLED MODELS, MAINLY MODEL AIRCRAFT AND UNMANNED AERIAL VEHICLES IN WHICH NO PEOPLE ARE TRANSPORTED.

 

  • Operating Voltage:  6.0v to 8.4v
  • Static Timing 30 Degrees BTDC WHEN SENSOR/MAGNET FIRST “TOUCH” !!!
  • Red/Green LED Sensor activity indicator
  • Tachometer Output ( Brown/Red /Orange wires)
  • Operating RPM Range: 400 to 10000 RPM’s
  • Output Start Voltage:  25 KV  400-800 RPM’s
  • Output Voltage @ 10000 RPM’s: 12-15KV
  • Hi Voltage wire length: 16 inch  / 410 mm
  • Power and Sensor wire length minim: 7 inch / 180 mm
  • Dimensions Standard: L 3-5/32″  x  W 1-3/4″ x  H 1-1/4″
  • Dimensions Metric:      L 81 mm  x  W 45.5 mm  x  H 32 mm
  • Weight: 9 Oz  / 255 Gr
  • Ability to be repaired, electronics, coil, wire or cap.

Specifications

 

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “CDI – 3 Cylinder Ignition For; Saito, Kolm, In-Line Engines Custom Cap, 5/8 or 3/4 HEX Plug”

Your email address will not be published. Required fields are marked *